Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

Elucidating the Influence of Electrical Potentials on the Formation of Charged Oligopeptide Self-Assembled Monolayers on Gold

Self-assembled monolayers (SAMs) based on oligopeptides have garnered immense interest for a wide variety of innovative biomedical and electronic applications. However, to exploit their full potential, it is necessary to understand and control the surface chemistry of oligopeptides. Herein, we report on how different electrical potentials affect the adsorption kinetics, stability and surface coverage of charged oligopeptide SAMs on gold surfaces. Kinetic analysis using electrochemical surface plasmon resonance (e-SPR) reveals a slower oligopeptide adsorption rate at more positive or negative electrical potentials. Additional analysis of the potential-assisted formed SAMs by X-ray photoelectron spectroscopy demonstrates that an applied electrical potential has minimal effect on the packing density. These findings not only reveal that charged oligopeptides exhibit a distinct potential-assisted assembly behaviour but that an electrical potential offers another degree of freedom in controlling their adsorption rate.     

Could chroman-4-one derivative be a better inhibitor of PTR1? – Reason for the identified disparity in its inhibitory potency in Trypanosoma brucei and Leishmania major

Most notable Kinetoplastids are of the genus Trypanosoma and Leishmania, affecting several millions of humans in Africa and Latin America. Current therapeutic options are limited by several drawbacks, hence the need to develop more efficacious inhibitors. An investigation to decipher the mechanism behind greater inhibitory potency of a chroman-4-one derivative (compound 1) in Trypanosoma brucei pteridine reductase 1 (TbPTR1) and Leishmania major pteridine reductase 1 (LmPTR1) was performed. Estimation of ΔG_bind revealed that compound 1 had a greater binding affinity in TbPTR1 with a ΔG_bind value of −49.0507 Kcal/mol than −29.2292 Kcal/mol in LmPTR1. The ΔGbind in TbPTR1 were predominantly contributed by “strong” electrostatic energy compared to the “weak” van der Waals in LmPTR1. In addition to this, the NADPH cofactor contributed significantly to the total energy of TbPTR1. A characteristic weak aromatic π interaction common in PTR1 was more prominent in TbPTR1 than LmPTR1. The consistent occurrence of high-affinity conventional hydrogen bond interactions as well as a steady interaction of crucial active site residues like Arg14/Arg17, Ser95/Ser111, Phe97/Phe113 in TbPTR1/LmPTR1 with chroman-4-one moiety equally revealed the important role the moiety played in the activity of compound 1. Overall, the structural and conformational analysis of the active site residues in TbPTR1 revealed them to be more rigid than LmPTR1. This could be the mechanism of interaction TbPTR1 employs in exerting a greater potency than LmPTR1. These findings will further give insight that will be assistive in modifying compound 1 for better potency and the design of novel inhibitors of PTR1.     

Recent Advances of Freestanding Cathodes for Li-S Batteries

Lithium-sulfur batteries (LSBs) with high energy density and low cost have been recognized as one of the most promising next-generation energy storage systems. Although it has taken decades of development, the practical application of LSBs has been hindered by several inherent obstacles, particularly the severe shuttle effect and sluggish reaction kinetics in the sulfur cathode. Various strategies have been proposed to address these problems via rational design of electrode materials and configurations. Freestanding sulfur cathode could be a promising strategy to improve the sulfur mass loading at the cathode level and energy density of LSBs. This minireview will briefly summary the recent advances in freestanding cathodes for LSBs. The advantages and disadvantages of various freestanding cathodes are discussed and the prospects for the development of flexible cathodes are envisioned.     

Plasmon Coupling-Induced Hot Electrons for Photocatalytic Hydrogen Generation

We present the fabrication of core-shell-satellite Au@SiO₂-Pt nanostructures and demonstrate that LSPR excitation of the core Au nanoparticle can induce plasmon coupling effect to initiate photocatalytic hydrogen generation from decomposition of formic acid. Further studies suggest that the plasmon coupling effect induces a strong local electric field between the Au core and Pt nanoparticles on the SiO₂ shell, which enables creation of hot electrons on the non-plasmonic-active Pt nanoparticles to participate hydrogen evolution reaction on the Pt surface. In addition, small SiO₂ shell thickness is required in order to obtain a strong plamon coupling effect and achieve efficient photocatalytic activities for hydrogen generation.     

冶金法生产太阳能级硅的除硼方法、技术及工艺

太阳能作为一种绿色可再生能源受到了广泛关注,而杂质去除是从冶金级硅中获得太阳能级硅所需的纯化过程,对硅基太阳能电池的制备至关重要。冶金法制备太阳能级多晶硅新工艺技术由于其能耗低、成本低和污染少等优点,成为研究开发的热点,但如何有效地去除硼是我们面临的最严峻的挑战之一。本文综述了硼的热力学和动力学性质(溶解度、扩散率、扩散系数、传质系数和活度系数)以及近年来除硼的相关课题研究(吹气、炉渣处理、等离子体处理、酸浸和溶剂精炼)。研究发现,溶剂精炼是一种很有前途的获取高纯硅的方法,硅的富集率以及硼的去除率均可达到90%以上,而添加剂能够加强硼化物的形成和析出来改进除硼工艺,且后续几乎可被完全消除,不会对精炼硅造成污染,这将更加有效除硼并增加工艺实用性。最后本文对几种除硼工艺进行了比较分析,并对冶金法的应用前景进行了展望。     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

InSb芯片碎裂与迸溅金点的关系

批量生产中经常发生的锑化铟(InSb)芯片碎裂问题制约着InSb红外焦平面探测器(IRFPAs)成品率的提升.经分析认为:低周期液氮冲击下发生在器件边沿区域的InSb芯片破碎与该区域中迸溅金点的存在有关.为从理论上明晰迸溅金点对InSb芯片局部碎裂的影响,本文建立了包含迸溅金点的InSb IRFPAs结构模型,分析了迸溅金点的存在对应力分布的影响.在此基础上,在应力集中处预置不同长度的初始裂纹用以描述InSb晶片中的位错,以能量释放率为判据,探究InSb芯片碎裂与迸溅金点和位错线长短的关系.结论如下:1)迸溅金点的存在对InSb芯片碎裂的影响是局部的,在迸溅金点与InSb芯片接触区域的两侧会形成两个应力集中点; 2)环绕预置裂纹的能量释放率会随着预置裂纹长度的增加而加速增大,当预置裂纹长度接近InSb芯片上表面时,能量释放率近乎指数增加,并在预置裂纹贯穿InSb芯片时达到最大值; 3)迸溅金点引起的InSb芯片破碎属于Ⅰ型断裂失效模式,在多周期液氮冲击中,位错线在应力集中效应的驱使下逐步扩展,直至贯穿InSb芯片,最终形成宏观碎裂失效现象.     

Recent advances of organometallic complexes in emerging photovoltaics

Organometallic complexes (OMCs) consisting of organic and metal active moieties have shown immense potential for application in solar cells. The diverse structure, rich porosity, and unique charge centers of OMCs enable them to be functional in solar cells. In this review, we introduced four types of OMCs, such as crown organometallic complexes, β-diketone metal complexes, cyclometallic complexes, and main chain metal-containing polymers, providing an in-depth analysis of the structure-performance relationship. OMCs could serve as active or interlayer materials in a variety of solar cell systems such as organic solar cells, perovskite solar cells, and dye-sensitized solar cells, especially some metals to improve the photoelectric performance of the device as dopants. In the end, perspectives on the opportunities and challenges of OMCs are given.     

Formation of an Azaruthenacyclopentadiene Skeleton via Ammonia Activation by an Electron-Deficient Ru3 Cluster

A dicationic triruthenium complex containing a μ₃-η³-C₃ ring, [(Cp*Ru)₃(μ₃-η³-C₃MeH₂−)(μ₃-CH)(μ-H)]²⁺ ( 1 a , Cp*=η⁵-C₅Me₅), reacted with ammonia to yield a μ-amido complex, [(Cp*Ru)₃(μ₃-η³-CHCMeCH) (μ₃-CH)(μ-NH₂)]²⁺ ( 5 ), via N−H bond scission. Subsequent treatment with base resulted in C−N bond formation to yield a μ₃-η²:η²-1-azabutadien-4-yl complex, [(Cp*Ru)₃(μ₃-CH)(μ₃-η²:η²-NH=CH−CMe=CH−)]⁺ ( 6 a ). The azaruthenacyclopentadiene skeleton was alternatively synthesized by the photolysis of mono-cationic complex [(Cp*Ru)₃(μ₃-η³-C₃RH₂−)(μ₃-CH)]⁺ ( 2 a ; R=Me, 2 b ; R=H) in the presence of ammonia. The C₃ ring skeleton was broken via the electron transfer to the π*(C−C) orbital in the C₃ ring, and a transiently generated unsaturated μ₃-allylic species can take up ammonia, resulting in N−H bond scission followed by C−N bond formation.